Pellachrom Antiskid Polyurethane Color
Sale!

Pellachrom Antiskid Polyurethane Color

Original price was: €28.50.Current price is: €8.55.

Color:

Capacity:

SKU: 9228636288 Category:

Description

The Antiskid is an anti-slip, two components, polyurethane paint, developed by Greek company Pellachrom.

The Antiskid is a premium, anti-slip, two-part polyurethane top coat, extremely resistant to adverse weather conditions. Its composition ensures strong adhesion on all surfaces.

It is ideal for indoor and outdoor use, especially for Marine applications. It has excellent yellowing resistance.

The Pellachrom Antiskid has excellent resistance properties against strong chemicals and also has strong adhesion properties. It can be applied on boat decks, windsurf boards, ramps, tennis courts, stairs, ladders, pools, etc.

Carefully prepare the surface to obtain good results. Remove all weathered coatings, rust and oils. Sand surface smooth and remove sanding residue with a rag. If the Antiskid is going to be applied to a polyester surface, degreasing the surface is of utmost importance.

Wash the surface with warm water and soap

Rinse well, allow to dry and clean using a thinner

Sand surface smooth and remove sanding residue with a whisk and a thinner soaked rag

The surface is now ready to be painted. Any other surface preparation method could trap grease inside the surface thus, rendering painting impossible.

Apply a Primer coating with Uni-Primer, 1-2 coats

Apply 2 coats of Antiskid

Instructions

Make sure your tool has the adequate quantity of paint to cover an entire section. This practice should be strictly followed to obtain optimum results.

Do not apply when ambient temperature and surface temperature is below 10°C, above 35°C or when relative humidity is above 70% and surface humidity is above 4%.

Adequate ventilation must be ensured due to the hazardous fumes generated during paint application.

Drying Out – Coverage

Drying times are dependent on ambient temperature and film thickness.

Touch Dry: 1-2 hours.

Recoat: 12 hours.

Practical Coverage: 2 6 m²/lt depending on the thickness of each coat and the surface porosity.

Download here the Technical Data of the Pellachrom Antiskid

Additional information

mycustom

Color#Blanco, Dark Grey~Capacity#750 ml

Reviews

There are no reviews yet.

Be the first to review “Pellachrom Antiskid Polyurethane Color”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *